melist surface resistivity meter在測試薄膜表面電阻或靜電時使用方便並可重復使用.
操作簡便
要測試薄膜表面電阻需要把該測試筆置於需測試的薄膜表面上. 按下紅色按紐,結果就顯示在指示燈上.
10/3=1千歐姆 綠燈顯示
10/4=10千歐姆 綠燈顯示
10/5=100千歐姆 綠燈顯示
具有靜電分散性能的區域
10/6=1 兆歐 黃燈顯示
10/7=10兆歐 黃燈顯示
10/8=100兆歐 黃燈顯示
10/9=1000兆歐 黃燈顯示
10/10=10,000兆歐 黃燈顯示
10/11=100,000兆歐 黃燈顯示
10/12=1,000,000 兆歐 紅燈顯示
靜電測試
規格
電源 9伏特pp3鹼性電池
測試電壓 9伏(通用)
相對濕度 0%--90%(未經壓縮)
精確度 ±10%
可重複使用率 ±5%
重量 6 安士
尺吋 5×3×1吋
建議您12個月為此測試表做一次刻度的調適,以便其讀數保持準確.
MELIST METER
Easy to operate:
To measure surface resistivety, place the meter onto the surface that requires testing, press the red test button and hold. The LED that illuminates constantly is the decade measured.
10/3= 1kilohmGreen LED
10/4=10 kilohmGreen LED
10/5=100 kilohmGreen LED
10/6=1 meg ohmYellow LED
10/7=10 meg ohmYellow LED
10/8=100 meg ohmYellow LED
10/9=1000 meg ohmsYellow LED
10/10=10,000 meg ohmsYellow LED
10/11=100,000 meg ohmsYellow LED
10/12=1,000,000 meg ohmsRed LED
＞10/12=insulativeRed LED
Checking Resistance to ground:
Insert the ground cord into the ground socket, this isolates the test probe on the right side of the meter(the same side of the socket). Connect the alligator chips to your ground connection.
Place the meter onto the surface to be tested, press and hold the test button. The LED that remains illuminated is the decade measured. The measurement will be resistance to the ground in ohms instead of ohms per square.
Specification
Power supply9 volts PP3 alkline battery
Test voltagenominal 9 volts
Relative humidity0% to 90% (non-condensing)
Accuracy+/-10%
Repeatability+/-5%
Weight6 ounces
Size5”×3”×1”
Calibration is recommended every 12 months. Detailed calibration instructions available upon request.
|
聯系電話：0769-85540548
|
|||
傳 真 ：0769-85322000 |
|||
地 址 ：東莞市長安鎮 |
靜電表本司大量供應用於測量薄膜表面靜電和電阻的靜電表和電阻測試筆,派克筆,測量工具,薄膜,筆,薄膜靜電測試表.薄膜電阻率測試筆,科利宏表層抗力測量計.We are here a big manufacturer tosupply the surface resistivity meter.meter,surface tensiometer,SIR.