 |
BLADE
刮 墨 刀 |
包裝行業首選 |
 |
|
Melist 刮墨刀采用瑞典精密鋼帶、工藝制造，適合各種凹版、柔性版塗布上光。由於其特殊的制造工藝，極大地延緩刀刃磨損且延長滾筒壽命。
This blade are made of Swedish precision steel strip and technology. It suit for various gravure and flexo printing. Due to the special technology, the edge be frayed obviously slower and the life of cylinder can be prolonged. |
| |
|
| 用於凹版(銅版)印刷 |
ROTOGRAVARE |
Melist 刮墨刀，適用於各種基層和墨水。
Melist 刮墨刀，采用的高檔鋼帶使用持久，耐墨水腐蝕。
|
 |
Melist-Blade,this high quality blade is used for all types of substrates and inks.
Melist-Blade,with precision steel strip for long runs and abrasive inks. |
| |
| |
|
| 適用於柔版印刷 |
FLEXD PRINTING |
Melist 刮墨刀，適合各種柔版印刷應用。(網格包裝出版，標簽印刷，凹印和印卡印刷。)
|
 |
| Melist-Blade,for all flexo printing applications.(Wide web packaging presses,lable presses,corrugated pre-print and postprint presses). |
| |
| |
|
| 角度 |
ANGLE |
刮墨刀最佳角度是60-70度，如此刮墨效果最好。
較大的角度使刀尖壓力減小，從而延長壽命。 |
 |
The optimum angle of the blade between 60-70 thus giving the best possible wipe.
Having a high angle allows for reduced pressure on the blades tip,therefore its life is increased. |
|
| |
|
| 規格 |
SPECIFICATION |
| 10 x 0.15 x 0.07/1.3mm |
Hardness: 1960N/mm(580HV +/- 15) |
| 20 x 0.15 x 0.07/1.3mm |
Thickness: 0.15/0.20mm |
| 25 x 0.15 x 0.07/1.3mm |
Height: 10-60mm |
| 30 x 0.15 x 0.07/1.3mm |
Thickness of edge: 0.07/0.10mm |
| 35 x 0.15 x 0.07/1.3mm |
Width of edge: 0.07/0.10mm |
| 40 x 0.15 x 0.07/1.3mm |
|
| 50 x 0.15 x 0.07/1.3mm |
硬度：1960N/mm(580HV +/- 15) |
| 60 x 0.15 x 0.07/1.3mm |
刀身厚度：0.15/0.20mm |
| 40 x 0.20 x 0.10/1.3mm |
刀身高度：10-60mm |
| 50 x 0.20 x 0.10/1.3mm |
刀口厚度：0.07/0.10mm |
| 60 x 0.20 x 0.10/1.3mm |
刀口高度：1.30mm |
| |
|
| Packaging: 100m/Box |
包裝：100m/盒 |
| |
|
| |
|
|
|
|
|
|
|
|
|
 |